Network Setup

Temporary change the mac address serial of your wifi module

(1) Disable unused Network adapters

  1. Press Win + R, type ncpa.cpl and click OK

  1. Remember the name of the active connection

  2. Right-click the Windows logo, select Device Manager

  3. Right-click and select Disable device on all other Network adapters

(2) Change Mac Address for Wifi

Skip this step if you don't have wifi in your pc or you have disabled it in bios!

This will not change your serials permanent, they will reset after a Windows reinstallation

Do this for all possible network connections except your ethernet adapter!

Download TMAC

2MB
TMACv6.0.7_Setup.zip
archive
Open

  1. Download the file from above

  2. Unzip the file

  3. Run TMAC_setup.exe

Run TMAC

  1. Run TMAC

  2. Select a network connection and click Random Mac Address

(3) Change adapter properties

  1. Press Win + R, type ncpa.cpl and click OK

  1. Right-click your active connection and click on Properties

  2. Configure it as shown below:

  1. Click Configure

  1. Switch to Advanced and configure the following properties:

Not every adapter has every option so dont worry if you dont have an option listed here

(4) Download Cloudflare Warp

Either add Warp to your autostart or run it before you start Valorant or Vanguard!

It is required to do this every pc restart and you also have to download Valorant with Warp active!

LogoDownload WARP stable releasesCloudflare Docs

  1. Run the downloaded file and follow the app setup

  2. Open Warp and connect

  3. It should look like this:

PreviousRun the loaderNextChange Monitor serials

Last updated